• TECHNICAL CHARACTERISTICS
• Wall-mounted, straddle-type units.
• Electronic control instrument.
• Expansion device: capillary tube.
• Electrical defrost
• Room lighting on all units.
• Cable for door heater connection on low temperature units.
• All units are equipped with a fixed calibration low pressure switch
• Condensate evaporation tray with safety overflow drain on all units.
• Drain heater on all medium and low temperature units.
• Units recommended for use at ambient temperatures not lower than 10°C.
• Suitable accessories are required for use at temperatures below 10°C. In case of outdoor installation it is necessary to protect them from the weather.

Optionals:

Special voltage.

Water-cooled condenser: units equipped with water-cooled condenser are also provided with a pressure controlled water valve, a fixed calibration high pressure switch (even on single-phase units), as well as a compressor cooling fan (low temperature units only).

Voltage monitor.

High pressure switch (for one-phase units).

Condenser fan pressure switch.

Condenser fan speed regulator (forms 3).

Switchboard heater.

Crankcase heater.

Supplemental solenoid valve (on the discharge line of medium and low temp. units, recommended in case they are exposed to low ambient temperatures).