• TECHNICAL CHARACTERISTICS
• Wall-mounted, through-the-wall type units
• Electronic control panel.
• Expansion device: capillary tube.
• Hot gas defrost.
• Cold room lighting: units are only pre-arranged for a cold room lighting connection.
• Cable for door switch connection; door switch functions can be programmed on the electronic control panel.
• Cable for door heater connection on all low temperature units.
• Crankcase heater on compressors.
• All forms are equipped with adjustable low and high pressure switches with automatic reset.
• Suction accumulator.
• Supplemental solenoid valve.
• Condenser fan pressure switch.
• Direct drainage of condensate.
• Drain heater on all medium and low temperature units.
• Units recommended for use at ambient temperatures not lower than 10°C.
• Suitable accessories are required for use at temperatures below 10°C. In case of outdoor installation it is necessary to protect them from the weather. 

Optionals:

Special voltage.

Water-cooled condenser: units equipped with water-cooled condenser are also provided with a pressure controlled water valve, a fixed calibration high pressure switch (even on single-phase units), as well as a compressor cooling fan (low temperature units only).

Remote panel: already connected to the unit and provided with a 5 metres long cable (on request extension up to 20 metres).

Voltage monitor.

Condenser fan speed regulator.

Switchboard heater.